数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
艾索
null
null

我的位置:

爱思创Extron电子-XTP 图像解析度转换接收器-XTP SR HDMI

厂家报价:面议 产品状态:(停产)

XTP 图像解析度转换接收器 XTP SR HDMI

产品品牌: 爱思创EXTRON
产品类别: 产品中心
加入收藏 我要评价 咨询
咨询
姓名:*
手机:*
职位:
邮箱:*
所在单位:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
XTP SR HDMI
NOTE The XTP THDMItransmitterand XTPSR HDMI receiver can be used together, with twisted pair cables linking the transmitter and receiver, or with other Extron XTP products.
NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Video
Gain Unity
Resolution range Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking
Signal type Single-link HDMI (or DVI-D*)
Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to1920x1200 @ 60 Hz)
EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
HPD Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock 165 MHz
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI, HDCP 1.1
Interconnection between transmitter and receiver
Connectors 1 female RJ-45 per unit
Termination standards TIA/EIA T568B
Signal transmission distance 330' (100 m) using shielded twisted pair or XTP DTP 24 cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth, STP (Shielded Twisted Pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Video processing
Digital sampling 24 bit, 8 bits per color, 165 MHz standard
Colors 16.78 million
Video output
Number/signal type 1 single link HDMI (or DVI-D*)
Connectors 1 female HDMI type A
Scaled resolutions 640x480 6,8,9 , 800x600 6,8,9 , 852x480 6,8,9 , 1024x768 6,8,9 , 1024x852 6,8,9 , 1024x1024 6,8,9 , 1280x768 6,8,9 , 1280x800 6,8,9 , 1280x1024 6,8,9 , 1360x765 6,8,9 , 1360x768 6,8,9 , 1365x768 6,8,9 , 1365x1024 6,8,9 , 1366x768 6,8,9 , 1400x1050 6,8 , 1440x900 6,8,9 , 1600x1200 6,8 , 1680x1050 6,8 , 1920x1200 6,8
HDTV: 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8
1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz, 9 = 75 Hz.
Audio
Gain Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise <0.1%, 20 Hz - 20 kHz at nominal level
S/N >90 dB, at maximum balanced output (unweighted)
Crosstalk ≤-80 dB @ 1 kHz, fully loaded
Stereo channel separation >80 dB @ 1 kHz
Sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Bit depths 16, 20, 24 bit
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV≈ 2 dBu
Audio output
Number/signal type 1 combined with the HDMI video output
1 analog stereo, balanced/unbalanced
1 digital audio via S/PDIF output connector
Connectors (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
1 female RCA jack (tip, ring)
Supported formats
HDMI LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2 Channel
S/PDIF LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Analog Analog stereo audio
Impedance
Analog 50 ohms unbalanced, 100 ohms balanced
S/PDIF 75 ohms
Maximum level (Hi-Z) >+12 dBV balanced; +6 dBV unblanced
Gain error ±0.5 dB channel to channel
Volume control -100 dB to 0 dB (control 0 to 100 in 1 dB steps)
NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
Communications — receiver
Serial control port 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole
Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
USB control ports 1 front panel female mini USB B
USB standards USB 2.0, low speed
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS )
Communications — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
Baud rates Up to 115200 baud
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
Ethernet pass-through port 1 female RJ-45 connector
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
Relay number/type 2 normally open relays
Relay control connectors (1) 3.5 mm captive screw connectors, 4 pole
Relay control contact rating 24 V, 1 A
General
External power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Power consumption
Device 10.3 watts, 12 VDC
Device and power supply 12.3 watts, 12 VDC
NOTE Each XTP transmitter or receiver can be powered either locally by an external power supply or remotely using an optional power injector.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, novents
Thermal dissipation
Device 33.8 BTU/hr
Device and power supply 40.9 BTU/hr
Mounting
Rack mount Yes, with optional 1Urack shelf
Furniture mount Yes, with optional under-desk mounting kit
Pole mount Attachable to a projector mount pole with optional PMK 350 kit
Enclosure type Metal
Enclosure dimensions 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight 1.6 lbs (0.7 kg)
Shipping weight 4 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.
EMI/EMC CE**, C-tick, FCC Class A**, ICES, KCC, VCCI
Environmental Complies with the appropriate requirements of RoHS, WEEE.
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-071515-D10)
    null