数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-用于 VGA 和 RS-232 的四合一 MTP 双绞线发送器-MTP 4T 15HD RS

厂家报价:面议 产品状态:(停产)

用于 VGA 和 RS-232 的四合一 MTP 双绞线发送器 MTP 4T 15HD RS

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
MTP 4T 15HD RS
Video
Gain Unity
Number/signal type 4 sets of proprietary analog signals
Connectors 4 female RJ-45
Video input and loop through — per transmitter
Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
Connectors 2 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 250 mV
Video output — see receivers' specifications
Sync
Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video
Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated
Input impedance 510 ohms
Output impedance 110 ohms
Max. input voltage 5.5 Vp-p
Polarity Positive or negative
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Serial control port output/input 1 set of proprietary signals on a female RJ-45 jack
NOTE The serial communications link of an MTP RL 15HD RS or MTP RL 15 HD RS SEQ is unidirectional only, transmitter to receiver, unless the receiver's directional jumper has been repositioned. The jumper should be repositioned only when the receiver is the only one in the system.
Baud rates Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.)
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type CAT 5/5e/6 (shielded or unshielded)
Power 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection,no vents
Mounting
Rack mount Yes, with included mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)
Product weight 6.0 lbs (2.7 kg)
Shipping weight 10 lbs (5 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(7.6-111609-D6)
    null