| SW2 DVI A, SW4 DVI A |
| NOTE |
*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. |
|
|
| Video |
| Maximum bit rate |
4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
| Formats |
RGB and YCbCr digital video |
| Standards |
DVI 1.0, HDMI 1.2 |
|
| Video input |
| Number/signal type |
2 or 4 single link DVI-D (or HDMI*) |
| Connectors |
2 or 4 female DVI-I |
| Equalization |
+6 dB or +12 dB, switch selectable for each input |
|
| Video output |
| Number/signal type |
1 single link DVI-D (or HDMI*) |
| Connectors |
1 female DVI-I |
|
| Audio |
| Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise |
0.01% @ 1 kHz at nominal level |
| S/N |
>90 dB at maximum output (unweighted) |
| Crosstalk |
<-45 dB @ 20 kHz, -72 dB @ 1 kHz or below |
| Stereo channel separation |
>80 dB @ 20 Hz to 20 kHz |
|
| Audio input |
| Number/signal type |
2 or 4 stereo, unbalanced |
| Connectors |
(2 or 4) 3.5 mm mini audio jacks (tip = L, ring = R, sleeve = GND) |
| Impedance |
>10k ohms unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level |
+8.2 dBV, unbalanced at 1% THD+N |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
| Number/signal type |
1 stereo, balanced/unbalanced |
| Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Maximum level (Hi-Z) |
>+16.5 dBu, balanced; >8.2 dBV, unbalanced at 1% THD+N |
| Maximum level (600 ohm) |
>+10.4 dBm, balanced; >7.1 dBm, unbalanced at 1% THD+N |
|
| Control/remote — switcher |
| Serial control port |
(1) RS-232, 3.5 mm captive screw connector, 5 pole (shared with autoswitching control) |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
1 = TX, 2 = RX, 3 = GND |
| Contact closure |
(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232) |
| Contact closure pin configurations |
4 and 5 shorted together enable autoswitch mode. |
| IR controller module |
IR 102 Remote Control, optional (#70-224-10)
30' maximum, 40 degrees off axis |
| Program control |
Extron's Simple Instruction Set (SIS ™ ) |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.7 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
|
| Rack mount |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10; RSB 126, 60-604-10); or 1U, 3.5" deep VersaTools ® rack shelf (RSF 123,#60-190-20; RSB 123, 60-604-20); or with optional VersaTools Back of the Rack Mount Kit, part #70-367-01 (MBB 100). |
| Furniture mount |
Yes, with optional MBU 123 VersaTools Mini Under Desk Mounting Kit,
#70-212-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight |
0.6 lbs (0.3 kg) |
| Shipping weight |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (7.6-042308-D5) |
