• 资讯
  • 产品
  • 企业
  • 招标
  • 项目
  • 电话
数字音视工程网

微信公众号

数字音视工程网

手机DAV

  • 热门搜索：
  • 技术风向标
  • 投影机
  • 数字标牌
  • LED小间距
    • null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    艾索
    null
    null
    null
    null
    null
    招商,
    null

    我的位置：

    爱思创Extron电子-用于 3G-SDI 信号的 DTP 发送器 - Decorator 型墙面板-DTP T 3G-SDI 230 D

    厂家报价：面议 产品状态：(在产)

    用于 3G-SDI 信号的 DTP 发送器 - Decorator 型墙面板 DTP T 3G-SDI 230 D

    产品品牌： 爱思创EXTRON
    产品类别： 产品中心

    地址：中国上海市松江区茸华路 686 号

    电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

    咨询 加入收藏 我要评价
    咨询
    所在单位:*
    姓名:*
    手机:*
    职位:
    邮箱:*
    其他联系方式:
    咨询内容:
    验证码:
    不能为空 验证码错误
    确定
    爱思创电子（上海）有限公司_爱思创Extron中国

    厂商介绍： 爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

    访问企业子网
    经销商 联系方式 价格
    爱思创Extron电子 4000.398766、 021-3760 1568 面议
    DTP T 3G-SDI 230 D
    Video
    Signal type SDI: NTSC @ 59.94 Hz, PAL @ 50 Hz;
    HD-SDI: 720p @ 25, 29.97, 30, 50, 59.94, 60 Hz; 1035i @ 50, 59.94, 60 Hz;
    1080i @ 50, 59.94, 60 Hz; 1080p @ 24, 30 Hz;
    3G-SDI: 1080p @ 50, 59.94, 60 Hz (4:2:2); 1080i @ 50, 59.94, 60 Hz (4:2:2);
    720p @ 24, 25, 50, 59.94, 60 Hz (4:2:2)
    Data rates 270 Mbps, 1.485 Gbps, 2.97 Gbps
    Standards SMPTE-259M, SMPTE-292M, SMPTE-424M, SMPTE-272M, SMPTE-299M, ITU-RBT.601,
    ITU-RBT.1120
    Video input
    Number/signal type 1 single link SDI, HD-SDI, or 3G-SDI digital component video
    Connectors 1 female BNC
    Equalization Automatic, up to 300' (100 m) for 3G-SDI
    Audio — pertaining to DTP
    Gain Unbalanced output: 0 dB (from receiver), balanced output: +6 dB (from receiver)
    Frequency response 20 Hz to 20 kHz, ±1 dB
    THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
    S/N >90 dB at maximum output (unweighted)
    Stereo channel separation >80 dB
    Digital sampling rate 48 kHz
    Bit depth 16 bit
    Audio input
    Number/signal type 1 stereo, unbalanced
    NOTE Analog audio is not embedded onto the digital video signal. Analog audio and digital embedded audio are transmitted simultaneously and output on the receiver on two different connectors.
    Connectors 1 female, 3.5mm, stereo jack, 2 channel; tip (L), ring (R), sleeve (Gnd)
    Impedance >10k ohms, DC coupled
    Nominal level -10 dBV (316 mVrms)
    Maximum level +7 dBV, unbalanced
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
    Audio output
    Signal type DTP 230
    Connector 1 female RJ-45
    Interconnection between transmitter and receiver
    Connectors 1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver
    Termination standards TIA/EIA T568B
    DTP signal
    Signal transmission distance Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
    Cable requirements Solid conductor, 24 AWG or better
    Cable recommendations 400 MHz bandwidth STP cable
    NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
    Communications — external device (RS-232/IR over TP)
    NOTE Protocol is mirrored between the connected DTP 230 or DTP 330 endpoints and the "Over TP" ports on the
    DTP T 3G-SDI 230 D. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Tx or Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints.
    Serial control port Bidirectional RS-232 control via (1) 3.5 mm, 5-pole captive screw connector
    (connector is shared with IR control port)
    Baud rates 300 to 38.4k baud
    Protocol Data bits = 8 or 7
    Stop bits = 1 or 2
    Parity = none
    Serial control pin configuration Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
    IR control port Bidirectional IR control via (1) 3.5 mm, captive screw connector, 5-pole
    (connector is shared with RS-232 control port)
    TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
    IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
    USB control port 1 front panel female mini USB B
    USB standards USB 2.0, low speed
    Program control Extron Simple Instruction Set (SIS™)
    General
    Power supply External
    Input: 100-240 VAC, 50-60 Hz
    Output: 12 VDC,1.5 A, 18 watts
    Power consumption
    Device 8.9 watts, 12 VDC
    Device and power supply 10.8 watts, 100-240 VAC, 50-60 Hz
    NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of thetwisted paircable.
    Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling Convection, no vents
    Thermal dissipation
    Device 12.5 BTU/hr
    Device and power supply 19.1 BTU/hr
    Mounting
    Furniture or wall mount Yes, with a 1 gang wall box or mud ring
    Enclosure type Metal
    Enclosure dimensions
    Faceplate 2.6" H x 1.3" W x 0.1 " D
    (6.6 cm H x 3.3 cm W x 0.3 cm D)
    Device 2.7" H x 1.7" W x 1.6" D
    (6.9 cm H x 4.3 cm W x 4.0 cm D)
    Product weight 1 lbs (0.5 kg)
    Regulatory compliance AS/NZS, c-UL, C-tick, CE**, FCC Class A**, ICES, UL
    NOTE **CE and FCC testing is conducted with STP cable.
    Product warranty 3 years parts and labor
    Everlast power supply warranty 7 years parts and labor
    NOTE All nominal levels are at ±10%.
    NOTE Specifications are subject to change without notice.
    NOTE Shipping dimensions and weights are available at www.extron.com .
    (4380-092818)
      null