我的位置:
经销商 | 联系方式 | 价格 |
---|---|---|
爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
P/2 DA2 WM F Series | |||
Video | |||
---|---|---|---|
Gain | Switchable: 0 dB, +1.2 dB, +2.2 dB (0.7V, 0.8V, or 0.9V when input is 0.7V and the gain/peaking switch is set to Unity, 50%, or 100%, respectively) | ||
Bandwidth | 300 MHz (-3 dB), fully loaded | ||
Video input | |||
Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter) | ||
Connectors | 1 female 15-pin HD | ||
Pin connections | ID bits on pins 4 and 11: selectably terminated to ground or passed through to local monitor output (loop-through) ID bits on pins 12 and 15: passed through to local monitor output (loop-through) Pin 9: the connection is passed through to local monitor output (loop-through) |
||
Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
Minimum/maximum levels | Analog: 0.4 V to 1.4 Vp-p with no offset | ||
Impedance | 75 ohms | ||
Horizontal frequency | 15 kHz to 135 kHz | ||
Vertical frequency | 30 Hz to 170 Hz | ||
Return loss | <-38 dB @ 5 MHz | ||
DC offset (max. allowable) | 200 mV | ||
Video output | |||
Number/signal type | 2 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter) | ||
Connectors | 2 female 15-pin HD (1 display, 1 local monitor) | ||
Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain |
||
Minimum/maximum levels | 0.4 V to 1.4 Vp-p | ||
Impedance | 75 ohms | ||
Return loss | <-40 dB @ 5 MHz | ||
DC offset | ±5 mV maximum | ||
Sync | |||
Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync | ||
Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync | ||
Input level | 3.0 V to 5.0 Vp-p | ||
Output level | TTL: 5.0 Vp-p, unterminated | ||
Input impedance | 510 ohms | ||
Output impedance | 40 ohms, typical | ||
Max. propagation delay | 18.8 ns | ||
Max. rise/fall time | 4 ns | ||
Polarity | Positive or negative (follows input) | ||
Audio | |||
Gain | Unbalanced output: 0 dB, balanced output: +6 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
THD + Noise | 0.03% @ 1 kHz at nominal level | ||
S/N | >90 kHz, balanced, at maximum output | ||
Audio input | |||
Number/signal type | 1 stereo, unbalanced | ||
Connectors | (1) 3.5 mm female stereo jack, 2 channel; tip (L), ring (R), sleeve (GND) | ||
Impedance | >5k ohms unbalanced, DC coupled | ||
Nominal level | -10 dBV (316 mV) | ||
Maximum level | +8.5 dBu (unbalanced) at 1% THD+N | ||
|
|||
Audio output | |||
Number/signal type | 1 stereo, balanced/unbalanced | ||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Maximum level (Hi-Z) | >+15 dBu, balanced or unbalanced at 1%THD+N | ||
Maximum level (600 ohm) | >+9 dBu, balanced or unbalanced at 1%THD+N | ||
General | |||
External power supply (included) | 100 to 240 VAC to 12 VDC, 1 A external power supply, regulated | ||
Power input requirements | 12 VDC, 0.2 A | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Convection, no vents | ||
Mounting | |||
Furniture or wall mount | Yes | ||
Enclosure type | Metal | ||
Enclosure dimensions | |||
P/2 DA2 WM F | |||
Plate | 4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang) |
||
P/2 DA2 WM F AAP | |||
Plate | 4.5" H x 8.3" W x 0.1" D (11.4 cm H x 21.1 cm W x 0.3 cm D) (4 gang) |
||
P/2 DA2 WM EC F | |||
Plate | 3.1" H x 4.0" W x 0.1" D (7.9 cm H x 10.2 cm W x 0.3 cm D) (Euro Channel) |
||
P/2 DA2 WM EC F AAP | |||
Plate | 3.1" H x 7.7" W x 0.1" D (7.9 cm H x 19.5 cm W x 0.3 cm D) (Euro Channel) |
||
All models | |||
Box | 2.6" H x 3.7" W x 1.6" D (6.6 cm H x 9.4 cm W x 4.1 cm D) |
||
Product weight | |||
P/2 DA2 WM F | 0.4 lbs (0.2 kg) | ||
P/2 DA2 WM F AAP | 0.6 lbs (0.3 kg) | ||
P/2 DA2 WM EC F | 0.3 lbs (0.1 kg) | ||
P/2 DA2 WM EC F AAP | 0.7 lbs (0.3 kg) | ||
Shipping weight | 2 lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
EMI/EMC | CE, FCC Class A | ||
Warranty | 3 years parts and labor | ||
|
|||
|
|||
(7.6-082709-D8) |