我的位置：
爱思创Extron电子-用于 DisplayPort、多通道音频、RS-232 和红外信号的光纤接收器-FOX II R DP
厂家报价：面议
产品状态：(停产)
用于 DisplayPort、多通道音频、RS-232 和红外信号的光纤接收器 FOX II R DP
产品品牌：
爱思创EXTRON
产品类别：
产品中心
地址：中国上海市松江区茸华路 686 号
电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| FOX II DP Series | |||
|
|||
|
|||
| Optical fiber interconnection between transmitter and receiver | |||
|---|---|---|---|
| Number/type | 2 fiber optic | ||
| Connectors | 2 LC connectors | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with an SM unit | ||
| Multimode | 300m (984') with 62.5µm OM1 multimode (MM) cableswith an MM unit 1 kmkm (3280') with 50µm OM2 multimode (MM) cables with an MM unit 2km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode cable with an MM unit |
||
|
|||
| Nominal peak wavelength | 850 nm for multimode, 1310 nm for singlemode | ||
| Data rate | 4.25 Gbps | ||
| Transmission power | |||
| Singlemode | -5 dBm, typical | ||
| Multimode | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Video | |||
| Maximum data rate | Up to 10.8 Gbps (2.7 Gbps per lane) | ||
| Maximum resolution | Up to 1920x1200 @ 60Hz, 1080p @ 60Hz and 2560x1600 @ 60Hz | ||
| Color bit depth | 12 bits for resolutions up to 1080p. 10 bits for all resolutions above 1080p. | ||
| EDID | Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables. | ||
| Standards | DisplayPort 1.1a | ||
| Video input and loop through — transmitters | |||
| Number/signal type | 1 DisplayPort input 1 DisplayPort loop-through |
||
| Connectors | 1 female DisplayPort input 1 female DisplayPort loop-through |
||
| Video output — receiver | |||
| Number/signal type | 1 DisplayPort | ||
| Connectors | 1 female DisplayPort | ||
| Video delay | 2 frames | ||
| Audio | |||
| Gain | |||
| Range | Adjustable, -18 dB to +10 dB | ||
| Default | |||
| Captive screw connector | Balanced output: 0 dB; unbalanced output: -6 dB | ||
| Mini stereo jack | Unbalanced output: 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.10% @ 1 kHz at nominal level | ||
| S/N | >90 dB at maximum output (unweighted) | ||
| CMRR | 65 dB @ 20 Hz to 20 kHz | ||
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
| Sampling rate | 32 kHz, 44.1 kHz, 48 kHz | ||
| Audio input — transmitter | |||
| Number/signal type | 1 digital audio, de-embedded from DisplayPort or 2 inputs: 1 balanced stereo 1 unbalanced stereo or 2 unbalanced mono |
||
| Connectors | 1 female DisplayPort (shared with video input) (1) 3.5 mm stereo jack (1) 3.5 mm captive screw connector, 5 pole |
||
| Impedance | ≥10k ohms unbalanced, ≥20k ohm balanced | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | +15.0dBu, balanced at 1% THD+N (5-pole); +6 dBV, unbalanced (3.5 mm stereo) | ||
| Source formats | PCM, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby® Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, DTS-HD Master Audio, DTS-HD, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 | ||
|
|||
| Audio output — receiver | |||
| Number/signal type | 1 digital audio, embedded with DisplayPort output 2 buffered outputs: 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono |
||
| Connectors | 1 female DisplayPort (shared with video output) (1) 3.5 mm stereo jack (1) 3.5 mm captive screw connector, 5 pole |
||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Nominal level | +4 dBV (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level (Hi-Z) | +15.0dBu, unbalanced at 1% THD+N | ||
| Audio delay | 2 frames | ||
| Source formats | PCM, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby® Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, DTS-HD Master Audio, DTS-HD, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 | ||
| Audio return input — receivers | |||
| Number/signal type | 1 stereo/mono, balanced orunbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | ≥10k ohms unbalanced, ≥20k ohm balanced | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level (Hi-Z) | +15.0dBu, balanced at 1% THD+N | ||
| Audio delay | 2 frames | ||
| Audio return output — transmitter | |||
| Number/signal type | 1 stereo/mono, balanced orunbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level (Hi-Z) | +15.0dBu, balanced at 1% THD+N | ||
| Audio delay | 2 frames | ||
| Control/remote | |||
| Serial control ports on each unit (transmitter and receiver) | |||
| Control | 1 female mini USB port B (front panel) 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel |
||
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel | ||
| Baud rate and protocol | |||
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Pass-through | 9600 to 115,200 baud | ||
| Serial control pin configuration | Captive screw: 4 = Tx, 5 = Rx, 3 = GND | ||
| Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) |
||
| IR control port | (1) 3.5 mm captive screw connector, 5 pole (connector is shared with RS-232 pass thru) TTL level (0 to 5V) modulated infrared control from 30kHz to 40 kHz | ||
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 2 A, 24 watts |
||
| Power consumption | |||
| Transmitter | |||
| Device | 16.5 watts, 12 VDC | ||
| Device and power supply | 19.4 watts, 100 - 240 VAC, 50-60 Hz | ||
| Receiver | |||
| Device | 14.2 watts, 12 VDC | ||
| Device and power supply | 15.8 watts, 100 - 240 VAC, 50-60 Hz | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on top and side panels | ||
| Thermal dissipation | |||
| Transmitter | |||
| Device | 53.8 BTU/hr | ||
| Device and power supply | 63.7 BTU/hr | ||
| Receiver | |||
| Device | 47.0 BTU/hr | ||
| Device and power supply | 52.6 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with optional rack shelf | ||
| Furniture mount | Yes, with optional under desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| Transmitter | 1.0" H x 8.7" W x 6.0" D (half rack wide) (2.5cm H x22.1 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Receiver | 1.0" H x 8.7" W x 6.0" D (half rack wide) (2.5 cm H x 22.1 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | |||
| Transmitter | 2.3 lbs (1.0 kg) | ||
| Receiver | 2.3 lbs (1.0 kg) | ||
| Shipping weight | |||
| Transmitter | 3 lbs (2 kg) | ||
| Receiver | 3 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.1-120914-D4) | |||
