• 资讯
  • 产品
  • 企业
  • 招标
  • 项目
  • 电话
数字音视工程网

微信公众号

数字音视工程网

手机DAV

  • 热门搜索：
  • 技术风向标
  • 投影机
  • 数字标牌
  • LED小间距
    • null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    艾索
    null
    null
    null
    null
    null
    招商,
    null

    我的位置：

    爱思创Extron电子-会议室协作系统 – Decorator 型墙面板切换器-HC 403

    厂家报价：面议 产品状态：(在产)

    会议室协作系统 – Decorator 型墙面板切换器 HC 403

    产品品牌： 爱思创EXTRON
    产品类别： 产品中心

    地址：中国上海市松江区茸华路 686 号

    电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

    咨询 加入收藏 我要评价
    咨询
    所在单位:*
    姓名:*
    手机:*
    职位:
    邮箱:*
    其他联系方式:
    咨询内容:
    验证码:
    不能为空 验证码错误
    确定
    爱思创电子（上海）有限公司_爱思创Extron中国

    厂商介绍： 爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

    访问企业子网
    经销商 联系方式 价格
    爱思创Extron电子 4000.398766、 021-3760 1568 面议
    HC 403 (HCT 102 D, HCR 102)
    NOTE This product consists of a switching transmitter (HCT 102 D) and a scaling receiver (HCR 102), sold together as a system.
    Video input
    Number/signal type
    Analog HCT 102 D: 1 VGA RGBHV
    Digital
    HCT 102 D 1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter)
    HCR 102 1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter)
    Connectors
    HCT 102 D 1 female 15-pin HD
    1 female HDMI type A
    HCR 102 1 female HDMI type A
    Nominal level Analog: 0.7 Vp-p
    Min./max. level Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain
    Impedance Analog: 75 ohms
    Horizontal frequency Analog: 15 kHz to 100 kHz
    Vertical frequency Analog: 30 Hz to 75 Hz
    HDMI equalization Automatic
    HDMI input cable length ≤50' (15 m) for resolutions up to 1920x1200 or 1080p @ 60 Hz; 2K, using Extron HDMI Pro Series cable
    Resolution range 640x480 to 1600x1200 and 1920x1200*, 480p, 576p, 720p, 1080i, 1080p, and 2K
    *reduced blanking
    Return loss <-40 dB @ 5 MHz
    DC offset (max. allowable) 1.5 V
    Standards DVI 1.0, HDMI 1.4, HDCP 1.4
    Sync — VGA
    Input type RGBHV, bi-level and tri-level sync
    Input level 1.9 V to 5.0 Vp-p
    S/N >90 dB at maximum input (unweighted)
    Max. input voltage 5.0 Vp-p
    Interconnection between transmitter and receiver
    Connector 1 female RJ-45 on each unit (transmitter and receiver)
    Termination standard TIA/EIA T568B
    Transmission distance Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable with a 1080p, 60 Hz signal
    Cable requirements Solid conductor, 24 AWG or better
    Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
    NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
    Video processing
    Decoder 12 bit digital (3D-adaptive comb filter)
    Analog sampling 12 bits per color, 170 MHz standard (RGB)
    Digital pixel data bit depth 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
    Colors 1 billion (10 bit processing)
    Video output
    Number/signal type 1 HDMI (with CEC)
    Connectors 1 female HDMI
    HDMI peripheral device power 250 mA
    Scaled resolution 640x480 6,8,9 , 800x600 6,8,9 , 852x480 6,8,9 , 1024x768 6,8,9 , 1024x852 6,8,9 , 1024x1024 6,8,9 , 1280x768 6,8,9 , 1280x800 6,8,9 , 1280x1024 6,8,9 , 1360x765 6,8,9 , 1360x768 6,8,9 , 1365x768 6,8,9 , 1365x1024 6,8,9 , 1366x768 6,8,9 , 1400x1050 6,8 , 1440x900 6,8,9 , 1600x900 6,8 , 1600x1200 6,8 , 1680x1050 6,8 , 1920x1200 6,8
    HDTV 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8
    1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz
    Audio
    Gain Unbalanced output: 0 dB; balanced output +6 dB
    Frequency response 20 Hz to 20 kHz, ±0.5 dB
    THD + Noise <0.1%, 20 Hz to 20k Hz at nominal level
    S/N >90 dB, at maximum input (unweighted)
    Crosstalk ≤-80 dB @ 1 kHz, fully loaded
    Stereo channel separation >80 dB @ 1 kHz
    Audio input
    Number/signal type 2 analog stereo, unbalanced or
    2 digital audio, embedded in the HDMI signal
    Connectors 2 female 3.5 mm mini stereo jacks; tip (L), ring (R), sleeve (ground)
    2 female HDMI Type A
    Source formats
    Analog Analog stereo audio
    HDMI LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
    Impedance 10k ohms, DC coupled
    Nominal level -10 dBV, unbalanced
    Maximum level +6 dBV, unbalanced
    CMRR >60 dB typical, unbalanced, @ 1 kHz
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV≈ 2 dBu
    Audio output
    Number/signal type 1 analog, line level stereo, balanced or unbalanced (variable)
    1 digital, embedded in HDMI (fixed)
    Connectors (1) 3.5 mm captive screw connector, 5 pole
    1 female HDMI
    Impedance 50 ohms unbalanced, 100 ohms balanced
    Gain error ±0.5 dB channel to channel
    Maximum level (Hi-Z) >+14 dBu, balanced; >+8 dBu, unbalanced
    Output volume range 0 to 100% in 1% steps
    Communications
    Contact closure remote control (1) 3.5 mm,3 pole captive screw connector
    Contact closure pin configuration Pin 1 = Gnd, pin 2 = input 2, pin 3 = input 3
    USB control port 1 front panel female USB mini-B
    USB standards USB 2.0, high speed
    Program control Extron Product Configuration Software (PCS) for Windows ®
    Communications — control processor
    Memory
    SDRAM 512 MB
    Flash 512 MB
    Software
    Configuration software Extron Global Configurator® Plus and Professional for Windows®
    Ethernet control
    Network interface controllers (NICs) 1
    Connectors 1 female RJ-45 connector
    Data rate 10/100Base-T, half/full duplex with autodetect
    Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
    Default settings Link speed and duplex level = autodetected
    IP address = 192.168.254.250
    Subnet mask = 255.255.255.0
    Gateway = 0.0.0.0
    DHCP = off
    DNS: 127.0.0.1
    Serial control
    Quantity/type 1 bidirectional RS-232
    Connectors (1) 3.5 mm captive screw connector, 3-pole
    Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits;
    1 (default) or 2 stop bits;
    no parity (default), even, or odd parity
    NOTE This 3-pole port supports software flow control. The default is no flow control.
    Pin configuration Pin 1 = Tx, 2 = Rx, 3 = Gnd
    Digital I/O control
    Quantity/type 4 digital input/output (configurable)
    Connectors (1) 3.5 mm captive screw connector, 6-pole
    Digital inputs
    Input voltage range 0 to 24 VDC, clamped at +30 VDC
    Input impedance >10k ohms
    Programmable pullup 1k ohms to +5 VDC
    Threshold low to high 2.8 VDC
    Threshold high to low 2.0 VDC
    Digital outputs 250 mA sink from 24 VDC max.
    Pin configurations Pins 1, 2, 4, 5 = digital I/Os 1, 2, 3, 4; pins 3, 6= Gnd
    IR control
    Quantity/type 1programmable TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
    Connector (1) 3.5 mm captive screw connector, 2-pole
    Pin configuration Pin 1 = signal, 2 = Gnd
    IR output carrier frequency 30 kHz to 300 kHz
    General
    Power supply External
    Input: 100-240 VAC, 50-60 Hz
    Output: 12 VDC, 4.2 A, 50 watts
    Power consumption
    System
    Device 20.5 watts
    Device and power supply 23.0 watts
    NOTE Connect the included 4.2 A, 50 W, external power supply to the HCR 102, and the receiver remotely powers the HCT 102 D. Alternatively, the transmitter can be powered locally by an optional external power supply.
    Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
    Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
    Cooling Convection, vents on top and sides
    Thermal dissipation
    System
    Device 68.9 BTU/hour
    Device and power supply 77.3 BTU/hour
    Mounting
    HCT 102 D
    Rack mount Yes, with optional UCM R308 rack mounting panel
    Furniture or wall mount Yes, with 2-gang junction box or mud ring mounting bracket and the included decorator-style wallplate, or with an optional AAP 424 panel
    HCR 102
    Rack mount Yes, with optional 1U high rack shelf or back of the rack mounting kit
    Furniture mount Yes, with included, attached MBU 125 under-desk mounting brackets
    Enclosure type Metal
    Enclosure dimensions
    HCT 102 D
    Faceplate 2.6" H x 3.2" W x 0.2" D
    (66 mm H x 81 mm W x 6 mm D)
    (Fits the openings in a 2-gang decorator-stylewallplate)
    Device 2.72" H x 3.48" W x 1.86" D
    (69 mm H x 88 mm W x 47 mm D)
    (Depth excludes connectors, height excludes mounting tabs.
    Allow at least 3.0", 76 mm, depth in the wall or furniture.)
    HCR 102 1.0" H x 8.75" W x 6.0" D (half rack wide)
    (25 mm H x222 mm W x 152 mm D)
    (Depth excludes connectors.)
    Product weight
    HCT 102 D 0.7 lb (0.3 kg)
    HCR 102 1.2 lbs (0.6 kg)
    Regulatory compliance CE**, C-tick, c-UL, FCC Class A**, ICES, UL, VCCI
    Complies with the appropriate requirements of RoHS, WEEE
    NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.
    Product warranty 3 years parts and labor
    Everlast power supply warranty 7 years parts and labor
    NOTE All nominal levels are at ±10%.
    NOTE Specifications are subject to change without notice.
    (4319-D3-091218)
      null